If you are in the business of insulating a new building, or upgrading an old one, the advantages of spray foam is undeniable. This type of insulation is more pricey than traditional ones, however with the benefits linked to spray foam insulation edmonton, you will actually be saving money on your bills. There are two types of foam insulation. Contingent on your requirements, you can select whether you want closed cell or open cell spray foam.
It isn’t uncommon for people who buy a home to find out that either the old house that they are buying has no insulation, or it isn’t well insulated. While this can be a nasty surprise, it is something that can be relatively easy to correct. It doesn’t even have to be all that expensive, and the money you spend to buy the Spray foam insulation contractor will mean great savings on your energy bills. One of the easiest ways to fix insulation problems is to use blow in insulation. Compressed insulation is put through a blowing machine to fluff it up and make it more effective. It can be blown through a hole in a wall in order to add insulation where there wasn’t any, or it can be blown into an unfinished attic to add insulation (or more insulation, if needed). Many times a special type of blanket is put down and the blow in insulation is blown in through a slit to keep it from going where you don’t want it. Then you just seal the slit and your insulation is contained.
Professionals have the best equipment and enough experience to do these types insulation, attic cleaning jobs quickly and easily. But if you are a do-it-yourself type person it is also possible to rent the proper equipment and purchase the blow in insulation so you can do this project on your own. You can find instructions on the internet if they don’t come with the insulation or equipment. The owens corning blown in attic insulation comes in four different types: fiberglass, rock wool, cellulose, and vermiculite. The fiberglass insulation has the best insulation properties, so you will need less of it than the other types, although it is a bit more expensive usually. Both Owens Corning and Johns Manville sell this type of insulation. Cellulose insulation is sometimes put on top of fiberglass insulation in order to take advantage of the best properties of each type. It is also used alone, though it does take more of it to get the same effect as you would with fiberglass. Newspaper is treated so that animals and pests are less likely to use it or try to eat it, as well as to make it more fire resistant, in order to make this type of insulation. owens corning blown in attic insulation
Two Kinds Of Foam Spray Insulation
Open-cell is more affordable and is more useful for blocking noise, while the closed-cell foam is denser, and works effectively in preventing water and air from seeping into the walls. The open-cell foam is spongier, since air gets into the cells while closed-cell insulation is more solid and rigid. Spray foam insulation adds sturdiness to the structure of a building. It efficiently fills cracks, therefore protecting the attic from water despite a storm ripping off the roof.
8 Advantages Of Spray Foam Insulation
-
Heating And Cooling Advantages
Spray foam has the unique ability of filling small cracks and crevices which means once the foam is applied into cracks, it swells and dries quickly, blocking water and air. It effectively keeps out cold and heat as well.
-
Reducing Noise
Open-cell spray foam can substantially dull noise, more than any other type of insulation. You can check out https://www.asifoam.com/ for more information on spray foam.
-
Keeping Out Allergens And Pollen
Another great advantage of spray foam insulation is that it reduces the volume of pollen or allergens from getting through the walls. Since the foam is filling up crevices and cracks, it means outside air cannot penetrate the walls, which is the case with other types of insulation.
-
Preventing Insects, Bugs, And Small Rodents From Moving In
The small holes in a building’s structure are the perfect entrance point for bugs, ants, and small rodents. Luckily, with small crevices and cracks closed up with spray foam, this will not be possible anymore. Closed-cell spray foam is the perfect choice for creating a barrier against these tiny critters.
-
Prevention Of Mold And Mildew Growth
Both closed and open cell foam insulation keeps moisture from getting through the walls of a building. Despite both kinds of foam reducing the accumulation of condensation, the closed-cell spray foam works effectively as a barricade against large volumes of water. The fewer water getting through the walls, the lower the risk of developing health issues because of mold and mildew.
-
Aggregating The Sturdiness Of The Walls
Because of the dense and hard consistency, closed-cell insulation can strengthen the structure of the walls. Buildings must meet a code that necessitates the walls to be at a minimum load bearing standard to support the building altogether. This standard does not always factor in mother nature. Heavy snow, strong winds and earthquakes can cause substantial damage. Spray foam insulation is effective for holding everything in place, like a strong glue. By insulating your attic using closed-foam you might be saving your roof in the event of a storm.
-
Longevity
Styrofoam and fiberglass insulation are not considered long-term solutions. Styrofoam starts breaking over time, while fiberglass starts bunching and sagging. Both types must be replaced at some point. Spray foam insulation, however, does not break or sage over prolonged periods in time. It can save you heaps of money long-term.
- Eco-friendliness
Spray foam insulation is excellent for lowering energy consumption and protecting the building against mildew and mold growth. Since it lasts for much longer, it uses less materials, making it an eco-friendly solution.
